Solution Description
PU Flex Timing Belt/PU Genuinely Unlimited Timing Belt
*Polyurethane belt loop power,by a unique thermoset molding process.
*Large-high quality polyurethane substance resistant to wear the belt and tear tesistant suitable ties.
*A single of the core wire to enhance belt power,10sile stregth,so that the belt has good dimensional security.
*Polyurethane electricity ring with modest tolerances,can promise the accuracy of thickness and size.
*All of the above features make the ployurethane ring has a higher energy with the physical and chemical security.
Polyurethane belt has the following properties:
*Mechanical properties *Chemical homes
Positive match,synchronous,running Resistant to getting older,drinking water remedy,UVUVA,anti-ozne
Constant size,no put up-elongation Working temperature:-30ºC-80ºC(limited time could
Low noise withstand 110ºC)
Wear resistant Resistant towards simple oils,fat and petrol
Low-main10ance Resistant to some acids
Highly adaptable
Belt speeds up to 80m/s
This round PU timing belt especially
appropriate for minimal load synchronous transmission,
such as:business office automation program and house appliances.
Relevant Belt
1.Ring belt from the constant steel core and the thermoplastic polyurethane substance,is a real no interface ring belt.
2.Ring belt to make sure the functions and operation beneath high load,this electricity transmission belt for substantial-speed and large load transfer.
three.Ring belt duration may possibly be from 1.seven-hundred to 22.000 meters.
four.Ring belt can be personalized according to customer’s specs of various versions,this sort of as:AT20,AT10,T10,T5,AT5,HTD8M,STD8M…..
*Ring belt particular processing:
1.Tooth surface and nylon cloth
2.Can be rolled back again a special pattern grinding and drilling
3.can cover the back again of the belt thicking
About opening belt
*Opening belt completed with a continuous size,the center and the sides parallel to the wire core.Common roll duration is 50 or a hundred meters.
*Open (PU) CZPT belt with a variety of different core option,such as kevlar main,very versatile main(HF)high-performance(HP)and higher toughness(HPF)
*Creation tolerance of tiny reliable transmission and has a dimensional stability.The creation approach or in the enamel and tooth insert a layer of nylon to make sure that purposes operating in the special characterstics of the exact same.Also thicker layer of polyurethane in the belt or the back of the red plastic to prevent corrosion or substantial load.
Product Record
*Sorts of product to select
MXL
Spec. | Tooth | Spec. | Tooth | Spec. | Teeth | Spec. | Teeth | Spec. | Enamel | Spec. | Teeth | Spec. | Tooth | Spec. | Enamel |
26MXL | 33 | 36MXL | forty five | 37MXL | forty six | 38MXL | 48 | 41MXL | fifty one | 46MXL | 58 | 53MXL | 66 | 54MXL | sixty seven |
55MXL | 70 | 56MXL | seventy one | 57MXL | 72 | 58MXL | 73 | 59MXL | seventy four | 60MXL | 75 | 61MXL | seventy six | 63MXL | seventy nine |
64MXL | eighty two | 65MXL | 83 | 71MXL | 89 | 72MXL | ninety | 73MXL | ninety two | 74MXL | 93 | 75MXL | ninety five | 76MXL | 96 |
77MXL | 97 | 78MXL | ninety eight | 80MXL | a hundred | 81MXL | 102 | 82MXL | 103 | 84MXL | one hundred and five | 85MXL | 106 | 86MXL | 107 |
87MXL | 110 | 88MXL | 112 | 89MXL | 114 | 92MXL | a hundred and fifteen | 93MXL | 119 | 94MXL | one hundred twenty | 95MXL | 121 | 96MXL | 122 |
97MXL | 123 | 98MXL | 124 | 99MXL | 125 | 100MXL | 126 | 101MXL | 127 | 102MXL | 128 | 105MXL | 132 | 107MXL | 134 |
109MXL | 136 | 112MXL | a hundred and forty | 114MXL | 143 | 115MXL | one hundred forty four | 116MXL | one hundred forty five | 120MXL | 150 | 122MXL | 153 | 124MXL | 155 |
126MXL | 157 | 128MXL | a hundred and sixty | 132MXL | one hundred sixty five | 140MXL | a hundred seventy five | 143MXL | 179 | 144MXL | one hundred eighty | 145MXL | 181 | 148MXL | 185 |
150MXL | 187 | 151MXL | 189 | 152MXL | a hundred ninety | 153MXL | 191 | 154MXL | 192 | 155MXL | 193 | 156MXL | 195 | 160MXL | two hundred |
168MXL | 210 | 184MXL | 230 | 200MXL | 250 | 204MXL | 255 | 205MXL | 256 | 208MXL | 260 | 348MXL | 435 | 400DMXL | 500 |
T10
Spec. | Teeth | Spec. | Enamel | Spec. | Tooth | Spec. | Enamel | Spec. | Teeth | Spec. | Teeth | Spec. | Enamel | Spec. | Teeth |
T10*260 | 26 | T10*300 | 30 | T10*330 | 33 | T10*370 | 37 | T10*390 | 39 | T10*400 | forty | T10*410 | 41 | T10*440 | 44 |
T10*450 | 45 | T10*460 | forty six | T10*480 | forty eight | T10*500 | 50 | T10*510 | 51 | T10*530 | 53 | T10*540 | fifty four | T10*550 | 55 |
T10*560 | fifty six | T10*600 | 60 | T10*610 | 61 | T10*620 | sixty two | T10*630 | sixty three | T10*650 | sixty five | T10*660 | 66 | T10*680 | sixty eight |
T10*690 | 69 | T10*700 | 70 | T10*720 | 72 | T10*730 | 73 | T10*750 | seventy five | T10*780 | seventy eight | T10*800 | eighty | T10*810 | eighty one |
T10*830 | 83 | T10*840 | eighty four | T10*850 | 85 | T10*860 | 86 | T10*880 | 88 | T10*890 | 89 | T10*900 | 90 | T10*910 | 91 |
T10*920 | 92 | T10*950 | 95 | T10*960 | 96 | T10*970 | ninety seven | T10*980 | ninety eight | T10*a thousand | a hundred | T10*1571 | 101 | T10*1050 | a hundred and five |
T10*1080 | 108 | T10*1100 | 110 | T10*1110 | 111 | T10*1140 | 114 | T10*1150 | 115 | T10*1200 | a hundred and twenty | T10*1210 | 121 | T10*1240 | 124 |
T10*1250 | a hundred twenty five | T10*1260 | 126 | T10*1280 | 128 | T10*1300 | 130 | T10*1320 | 132 | T10*1350 | 135 | T10*1360 | 136 | T10*1390 | 139 |
T10*1400 | one hundred forty | T10*1410 | 141 | T10*1420 | 142 | T10*1440 | 144 | T10*1450 | one hundred forty five | T10*1460 | 146 | T10*1500 | one hundred fifty | T10*1520 | 152 |
T10*1560 | 156 | T10*1580 | 158 | T10*1600 | one hundred sixty | T10*1640 | 164 | T10*1700 | 170 | T10*1750 | a hundred seventy five | T10*1760 | 176 | T10*1780 | 178 |
T10*1800 | one hundred eighty | T10*1850 | 185 | T10*1860 | 186 | T10*1880 | 188 | T10*1960 | 196 | T10*1980 | 198 | T10*2000 | two hundred | T10*2571 | 202 |
T10*2100 | 210 | T10*2120 | 212 | T10*2160 | 216 | T10*2170 | 217 | T10*2200 | 220 | T10*2250 | 225 | T10*2500 | 250 | T10*2800 | 280 |
H
Spec. | Enamel | Spec. | Teeth | Spec. | Tooth | Spec. | Tooth | Spec. | Tooth | Spec. | Enamel | Spec. | Enamel | Spec. | Enamel | Spec. | Teeth |
200H | 40 | 225H | forty five | 250H | 50 | 260H | 52 | 270H | 54 | 280H | 56 | 300H | 60 | 315H | 63 | 330H | sixty six |
350H | 70 | 390H | seventy eight | 420H | eighty four | 450H | ninety | 460H | 92 | 470H | ninety four | 480H | ninety six | 510H | 102 | 540H | 108 |
560H | 112 | 570H | 114 | 600H | 120 | 630H | 126 | 700H | a hundred and forty | 750H | one hundred fifty | 900H | one hundred eighty |
T2.5
Spec. | Tooth | Spec. | Tooth | Spec. | Tooth | Spec. | Teeth | Spec. | Enamel | Spec. | Enamel | Spec. | Enamel | Spec. | Teeth |
T2.5*120 | 48 | T2.5*one hundred forty five | 58 | T2.5*a hundred and sixty | 64 | T2.5*a hundred and eighty | 72 | T2.5*182.5 | 73 | T2.5*200 | eighty | T2.5*215 | 86 | T2.5*240 | 96 |
T2.5*245 | ninety eight | T2.5*260 | 104 | T2.5*285 | 114 | T2.5*330 | 132 | T2.5*380 | 152 | T2.5*420 | 168 | T2.5*five hundred | 200 | T2.5*600 | 240 |
T2.5*650 | 260 | T2.5*780 | 312 | T2.5*950 | 380 |
AT5
Spec. | Tooth | Spec. | Tooth | Spec. | Enamel | Spec. | Enamel | Spec. | Teeth |
AT5*375 | seventy five | AT5*390 | seventy eight | AT5*455 | 91 | AT5*490 | 98 | AT5*500 | one hundred |
AT10
Spec. | Teeth | Spec. | Tooth | Spec. | Enamel | Spec. | Enamel | Spec. | Enamel | Spec. | Enamel | Spec. | Enamel | Spec. | Enamel |
AT10*500 | fifty | AT10*600 | sixty | AT10*660 | sixty six | AT10*seven hundred | 70 | AT10*730 | seventy three | AT10*780 | seventy eight | AT10*800 | 800 | AT10*840 | eighty four |
AT10*920 | ninety two | AT10*960 | 96 | AT10*980 | ninety eight | AT10*1050 | one zero five | AT10*1080 | 108 | AT10*1100 | 110 | AT10*1150 | a hundred and fifteen | AT10*1200 | a hundred and twenty |
AT10*1210 | 121 | AT10*1250 | one hundred twenty five | AT10*1280 | 128 | AT10*1300 | a hundred thirty | AT10*1350 | one hundred thirty five | AT1390 | 139 | AT10*1400 | a hundred and forty | AT10*1480 | 148 |
AT10*1600 | a hundred and sixty | AT10*1700 | one hundred seventy | AT10*1860 | 186 | AT10*1900 | a hundred ninety |
S3M
Spec. | Tooth | Spec. | Teeth | Spec. | Tooth | Spec. | Tooth | Spec. | Tooth | Spec. | Teeth | Spec. | Teeth | Spec. | Teeth |
S3M120 | forty | S3M144 | forty eight | S3M150 | 50 | S3M183 | 61 | S3M192 | 64 | S3M201 | sixty seven | S3M210 | 70 | S3M231 | 77 |
S3M237 | seventy nine | S3M246 | 82 | S3M315 | one hundred and five | S3M357 | 119 | S3M418 | a hundred and forty | S3M420 | one hundred forty | S3M432 | a hundred and forty four | S3M453 | 151 |
S3M459 | 153 | S3M486 | 162 | S3M492 | 164 | S3M504 | 168 | S3M510 | one hundred seventy | S3M513 | 171 | S3M519 | 173 | S3M525 | 175 |
S3M528 | 176 | S3M537 | 179 | S3M543 | 181 | S3M546 | 182 | S3M549 | 183 | S3M555 | 185 | S3M564 | 188 | S3M571 | 191 |
S3M573 | 191 | S3M585 | 195 | S3M588 | 196 | S3M600 | 200 | S3M612 | 204 | S3M705 | 235 | S3M738 | 246 | S3M780 | 260 |
A3M717 | 239 | D3M327 | 109 |
HTD3M
Spec. | Enamel | Spec. | Tooth | Spec. | Tooth | Spec. | Teeth | Spec. | Enamel | Spec. | Teeth | Spec. | Teeth | Spec. | Enamel |
3M135 | 45 | 3M144 | 48 | 3M171 | fifty seven | 3M174 | fifty eight | 3M177 | fifty nine | 3M189 | sixty three | 3M195 | 65 | 3M207 | 69 |
3M225 | 75 | 3M228 | seventy six | 3M243 | eighty one | 3M255 | eighty five | 3M264 | 88 | 3M276 | 92 | 3M288 | ninety six | 3M294 | ninety eight |
3M300 | 100 | 3M312 | 104 | 3M315 | one hundred and five | 3M324 | 108 | 3M336 | 112 | 3M345 | 115 | 3M357 | 119 | 3M360 | a hundred and twenty |
3M366 | 122 | 3M375 | one hundred twenty five | 3M384 | 128 | 3M402 | 134 | 3M420 | 140 | 3M423 | 141 | 3M435 | 145 | 3M456 | 152 |
3M459 | 153 | 3M462 | 154 | 3M468 | 156 | 3M471 | 157 | 3M483 | 161 | 3M486 | 162 | 3M495 | 165 | 3M504 | 168 |
3M510 | 170 | 3M522 | 174 | 3M525 | one hundred seventy five | 3M537 | 179 | 3M540 | 180 | 3M549 | 183 | 3M555 | 185 | 3M564 | 188 |
3M573 | 191 | 3M606 | 202 | 3M657 | 219 | 3M669 | 223 | 3M693 | 231 | 3M699 | 233 | 3M708 | 236 | 3M720 | 240 |
3M738 | 246 | 3M879 | 293 | 3M1569 | 523 | 3M2040 | 680 |
*We also have design :L/XL/XXL/T5/AT3/H/PK/PJ/PH/DMB/DT5/DR/PL/MB/DAT10/DT10/S2M/S5M/5M/HTD2M/HTD5M/HTD14M/HTD8M,or as your requirment to make new model but want to spend model price,If you have no amount,famous remember to!
Application
About company
ZheJiang CZPT Transmission Products Co.,Ltd. Was proven in March 2004,have 16 a long time of creation knowledge.Local in No. 11, Lane 243, Jiugan Highway, Sijing City, Xihu (West Lake) Dis. District, ZheJiang ,China.Primary offer in transmission belt and modular chain belt and so on.creation quantity more than 50000 items 1 calendar year.all types of rubber materials,pvc and pu substance and many others.acknowledge specical generating as your requirment. We support customized provider.and delivery time most quickest 1day according to your orders.Firms adhering to the “integrity,quality,price tag,and support initial,ongoing innovation” enterprise philosophy,devoted to supply higher top quality products and substantial-good quality services for the client,the organization continutes to broaden the scale of growth,consumers during the nation.
If you have fascinated,cost-free time to get in touch with me please.
Redirect your twin climbing lines with ISC’s twin redirect pulley. This is the least difficult way to redirect double lines, with swinging side panels and aspect-by-aspect aluminum pulleys. With the wiggling cheek design, this complements the redirect setup nicely. Switch on the pulley, tap the rope on the two legs to connect it and redirect it to the best line angle for a lot more effectiveness. The sloped style of the higher panel retains the rope pulley and managing accurately. Created of light-weight aluminum, this pulley is stunning and compact, so it won’t take up too significantly place on your belt.
ep has a vast selection of pulleys in inventory and prepared to ship. All spare pulleys are made of large-grade aluminum and have pilot holes as standard. Flanges are created of steel zinc sheet if needed, but you can specify other materials by custom made purchase. Stock aluminum pulleys are available in imperial and metric pitches. We can modify stock pulleys in accordance to your specifications. You can contact buyer provider for pricing and shipping and delivery.