Solution Description

Introduction
Conveyor roller, critical component of belt conveyor, is used to efficiently support belt and bulk substance of conveyor. Conveyor roller is made up of shell, shaft, bearing, housing, seals and snapring. In accordance to China countrywide specifications, diameter are Ф76,Ф89,Ф108,Ф133,Ф159 and so on. PK Equipment conveyor roller is of exclusive composition, reasonable fitting and exact assembly, ensuing in substantial capacity and extended provider life.

Software:

Our conveyor idler can extensively applied for mining, coal, metallurgy, electrical electrical power, wharf and sea port, grain, chemical and practically any industy which have conveying technique. 

Different type of conveyor idlers: 

1. Flat/Carrier/Carrying Rollers: Utilized to deal with bulk&unit substance. 
2. Effect Rollers: Mounted at the loading level to take in the shocks and to support defend against belt injury. 
3. Return Rollers: Utilized to maintain and assist the belt during its return area and performs a cleaning motion
—Return rollers with Spaced Rings (Rubber Disc Rollers)
—Return Rollers with Helical Rubber Rings (Spiral Rollers)
four. Self-aligning/Education Rollers: Used to adjust the belt deviation, avoiding searching and making sure secure procedure of conveyor belt. 
—Tapered self-aligning rollers
—Friction self-aligning rollers

Specified pitches and qualified prospects of the worm do not permit the worm gear to travel the worm. This is valuable when the application wants to lock the output if the software is working in the opposite course. When the helix angle is less than 5°, the worm is self-locking. When the helix angle is increased than 10°, the worm can be pushed again. Worm and worm gear assemblies should be mounted on vertical, non-intersecting shafts.