Product Description
Type | Belt width(mm) | Standard Diameter(mm) | Length(mm) |
Drive Pulley | five hundred | 500 |
Length of the pulley depends on the belt width of the conveyor |
650 | five hundred~630 | ||
800 | 630~a thousand | ||
one thousand | 800~1150 | ||
1200 | 800~1150 | ||
1400 | a thousand~1350 | ||
1600 | 1150~1600 | ||
1800 | 1150~1800 | ||
2000 | 1350~2000 | ||
2200 | 1600~2200 | ||
2400 | 1800~2400 | ||
Bend Pully | 500 | 250~five hundred | |
650 | 250~630 | ||
800 | 250~one thousand | ||
one thousand | 250~1600 | ||
1200 | 250~1600 | ||
1400 | 315~1600 | ||
1600 | 400~1600 | ||
1800 | four hundred~1600 | ||
2000 | five hundred~1600 | ||
2200 | 630~1600 | ||
2400 | 800~1600 |
In a twin pulley program, this ratio is equivalent to the reference diameter of the output pulley currently being greater than the reference diameter of the enter pulley. It is relatively uncomplicated as prolonged as you compute the equipment ratios for a a lot more sophisticated pulley system step by action. For numerous pulleys, the ratios of the numerous components of the mechanism have to be calculated to figure out the overall ratio. In the picture over, the reference diameter of the reduced push wheel is 20mm, the radius of the higher wheel is 40mm, and the ratio is 2:1. 2 spins on the decrease wheel and 1 spin on the higher wheel. The gear ratio also tells us anything about the torque of the technique due to the fact the ratio of output torque to enter torque is equal to the gear ratio. Consequently, the torque applied to the upper wheel is two times as quickly, but the pace is halved.
Fastened pulleys are pulleys that keep the drum at 1 point. Whilst the drive necessary to lift or go an object is no diverse than lifting it with your arms, stationary pulleys enable you to modify the course of the necessary drive. For case in point, when attached to a bucket that draws water from a nicely, a stationary drinking water puller enables you to pull the water sideways, lifting the bucket in a a lot more hassle-free way than pulling it vertically, 1 hand at a time. The excess weight of the bucket is nonetheless the very same, but it is less difficult to lift.